Start a conversation

Displax Connect

Get help with the Displax Connect software and start using the Displax Touch sensors

  • How to check the Displax Connect version?

    The Displax Connect version is located on the area indicated bellow....

  • The Shield feature

    If you are experiencing difficulties achieving a good touch experience due to high electromagnetic interference levels, activate the Shield button. We can say that we have electromagnetic interference...

  • Factory Reset the Touch Controller

    Sets the Touch Controller to its default settings. All the settings (including gain, threshold, geometric calibration and so on...) will be reset to its default. How to perform a factory reset:...

  • Options available on the Advanced Tab

    Advanced configuration tools where you are able to : Define an optimisation level between a Fast touch experience and a Smooth touch experience Limit the number of touches reported by the Touch Contro...

  • How to check the Touch Controller Firmware version?

    The Firmware version of the Touch Controller can be found on the area indicated below:...

  • Restart the Touch Controller

    The Restart button allows you to restart the Touch Controller....

  • Touch test Tool

    This feature provides the user with more useful data than other mechanisms of testing and it is conveniently integrated with the DISPLAX Connect software. Depending on the specifications of the PC you...

  • Displax Connect layout

    Invert background button Security Pin Invert background button Possibility to alternate between a black/white background. On the first hand you can choose the white background. It will push more from ...

  • TUIO

    All Displax products offer the end users the possibility to activate the TUIO protocol, allowing them to get over the network values: X coordinate; Y coordinate; Pressure Sensing (only for Displax Ski...

  • Options available on the Settings Tab

    Basic settings where you are able to: Adjust the Gain Adjust the Threshold Enable and adjust the Shield level Enable and adjust the Palm feature Use the Sensor Tools Restart the Touch Controller Use t...