Standard Calibration

Home/Standard Calibration

Once you have a good touch detection, start the Geometric Calibration and make sure you are as accurate as possible during this process.

Click ‘Calibrate’ if the Touch Sensor is only associated with one LCD. If the Touch Sensor is placed over more than one LCD, please refer to the advanced calibration.

A black screen with four calibration points will be displayed and an instruction will be presented ‘To start calibration, touch on the target until it disappears. Repeat the process for the remaining points’.

Start touching the calibration point number 1 until the green circle is complete, then move for the next calibration point until the calibration point number 4. You may need to repeat a calibration point if requested by the calibration screen.