Skin Connect – Windows 10 Spring Update

Home/Skin Connect – Windows 10 Spring Update

Skin Connect – Windows 10 Spring Update

The recent update of Windows 10 (update 1803) has crashed the deprecated version of Skin Connect.

Displax has released a special driver for Windows 10 and we advise the update of it as soon as possible.

Before doing these update we advise to save the settings of Skin Connect so it can be restored if needed after the update is done.

Drivers can be found on the links below

Windows 10 – 64bits (driver v1.8.0.3)
Windows 10 – 32bits (driver v1.8.0.3)


With this update, some machines, even with this new driver, don’t detect the Displax Skin Driver, so the solution is:

  1. Open the PC BIOS menu. You can often access this menu by pressing a key during the bootup sequence, such as F1, F2, F12, or Esc.

    Or, from Windows, hold the Shift key while selecting Restart. Go to Troubleshoot > Advanced Options: UEFI Firmware Settings.

  2. Find the Secure Boot setting, and if possible, set it to Disabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.

  3. Save changes and exit. The PC reboots.

  4. Test again the Skin Connect driver.