To configure a Displaz Skin to send touch events over TUIO protocol you need to click on the TUIO icon (top right corner of the Displax Connect), choose the touch controller connected, fill the ip and port information and click on the “ADD TUIO CLIENT” button.
Note: TUIO should be configured after configuring the touch settings.
If TUIO events are being received in the Client PC, you can now close ‘DISPLAX Connect’, TUIO is now a Daemon (for windows)/Agent (OS X) process (it runs on the background).
To stop TUIO, please check the following steps:
It is recommended to stop sending TUIO events before uninstalling ‘DISPLAX Connect’.
OS X: From ‘Displax Connect’ 1.9.0 version onwards, if touch injection is ON, 100 touches for the Skin Ultra and 40 touches for Skin Fit will be recognized through TUIO. If touch injection is OFF, only 20 touches will be recognized. Skin Dualtouch either way recognizes two touches.
OSX Touch injection
Windows and Linux: Does not matter the touch injection status, only 20 touches will be recognized through TUIO, either in Skin Ultra or Skin Fit. Skin Dualtouch either way recognizes two touches.
Windows and Linux Touch injection
Windows: Once the Board is reset or unplugged, you should restart TUIO, otherwise TUIO events will stop being sent to the host. But if you shut down or restart the computer, TUIO will automatically restart and there is no need to perform this step.
Create a new account
Enter the destination URL
Or link to existing content