Brackets/Fixation Systems
Displax does not supply any kind of brackets/fixation systems.
However, we recommend using a system capable of :
- Up/Down micro-adjustment
- In/Out micro-adjustment
- Tilting micro-adjustment
- Pop-out capability
All the features above will allow for better adjustment possibilities in all necessary directions. It is important to align all the Tile units.
One example of a bracket/fixation system can be found here:
Related Articles
Recommended Hardware
Computer Windows 10 Pro or superior Intel core i7 500 GB SSD 16 GB DDR4 RAM Graphics card capable of Videowall configurations USB Expansion Ports Graphic cards tested (this is only an example) MATROX D1480 The GPU selected should be suited to your ...
RS232 Commands List
RS232 Packet Format: Header Monitor Addr (First) Monitor Addr (Last) Command1 Command2 Checksum In detail: Number of Field Name of Field Power On /Off Settings Signal Source Settings Data1 Header Header = 0xD5 Header = 0xD5 Data2 Monitor Addr (First) ...
Settings Adjustments
The DISPLAX TILE is configured at the factory, so there is no need to change its settings. All that is required is a new calibration, taking into consideration your setup configuration. Therefore, no settings need to be adjusted on the Settings Tab ...
Specifications
General Specifications Detection Method Projected Capacitive Multitouch Technology Input Method Sizes (Touch) Finger and Gloved Finger Diagonal Inches 55” Glass Substrate Glass Extra Clear Anti-Reflective Cooted Glass Glass ...
FAQ
When I use two or more Tile units together, how many touch points do I have? You will have 100 touch points per Tile unit, up to a maximum of 254 touches in total. The maximum amount of touches is a limitation of Windows 10. It may vary in other ...