Calibrate a Single Tile

Calibrate a Single Tile

How Do I Calibrate a Single Displax Unit?

If you are using a single Displax TILE unit, the calibration process is straightforward and closely mirrors the procedure used for a standard Displax Skin. You will use the Displax Connect software to align the touch sensor with your operating system's display coordinates.

Step-by-Step Calibration Process

Follow these steps to successfully calibrate your single TILE unit:

  1. Open Displax Connect: Launch the Displax Connect software on your connected PC. Ensure your TILE unit is detected (you should see the Product, Serial, and Firmware details populated).

  2. Navigate to Calibration: Select the CALIBRATION tab located in the middle of the main interface.

  3. Verify Screen Settings: Under the "Screens" section, verify that your display is correctly identified by the software (e.g., displaying the correct resolution and orientation, such as 1920 x 1080 Landscape).

  4. Initiate Calibration: Click the large CALIBRATE button located at the bottom of the software window.

Displax Connect software interface showing the TILE unit details, the selected CALIBRATION tab, and the CALIBRATE button at the bottom.

  1. Touch the Targets: Once you click calibrate, the screen will change, and 4 calibration targets will appear in the corners of your display.

  2. Complete the Sequence: Start by firmly touching target number 1. Keep your finger on the target until the green circle completely fills.

  3. Repeat: Repeat this touch-and-hold process sequentially for targets 2, 3, and 4 to finalize the calibration.

Troubleshooting Tip

If the touch points remain inaccurate after completing these steps, verify that the resolution listed under the "Screens" section in Displax Connect exactly matches the resolution set in your operating system's display settings before attempting to calibrate again.


    • Related Articles

    • Calibrate Multiple TILE Units

      How Do I Calibrate Multiple TILE Units Using Drag Mode? When building a Displax TILE video wall, video wall calibration mode relies on the operating system detecting a single, unified display canvas. Thefore, if your setup uses extended desktop mode ...

    • Video Wall Calibration

      How Do I Calibrate Multiple TILEs Using Video Wall Calibration Mode? DISPLAX Connect includes a dedicated Video Wall Calibration feature. This mode automates the creation of calibration areas, significantly speeding up the process of configuring ...

    • Map Touch Input for Multiple TILEs on Windows

      How Do I Map Touch Input for Multiple TILEs in Windows Extended Mode? After successfully calibrating multiple Displax TILE units in extended desktop mode, you might notice that touching one screen moves the cursor on a completely different monitor. ...

    • Set Up Mosaic using NVIDIA

      Creating a Video Wall Mosaic with DISPLAX Tile When using multiple DISPLAX Tile units together, you can merge them into a single large display (mosaic) using your graphics card control panel. This allows the operating system and applications to treat ...

    • Daisy-Chain Overview

      Daisy-Chain Setup Using Internal Videowall Processor DISPLAX TILE includes an internal videowall processor that allows multiple TILE units to be merged into a single display. In this configuration: TILE units are DisplayPort daisy-chained TILE units ...