Controller Configuration

Controller Configuration

Controllers and Config

Skin Mesh

Depending on the sensor size, Displax Skin Mesh requires a corresponding Touch Controller model, each preconfigured to work with a specific range of sensor dimensions.

Available Touch Controllers:

  • CH130 — For sensors 22" to 32"

  • CH262 — For sensors 43" to 55"

  • CH334 — For sensors 65" to 86"

Each controller is shipped with a specific Configuration ID (Config ID). This configuration is based on the characteristics and size of the touch sensor and is preloaded before shipment, ensuring the controller functions correctly only with the designated sensor type and size.

⚠️ Controllers are not interchangeable across sensor sizes or types unless reprogrammed by Displax.

How to Identify the Config ID

You can check the assigned Config ID in Displax Connect:
  • Open Displax Connect.

  • In the left panel, locate the entry next to Product — it shows both the sensor size and the configuration name.

    • Related Articles

    • Skin Mesh Calibration

      Calibration The DISPLAX Skin Mesh is designed to provide a Plug & Play experience using HID (Human Interface Device) technology. This means no drivers are required. However, in rare cases where there is a visible offset in touch accuracy, manual ...

    • Grounding Touch Controller

      Why is Grounding the Controller Important? Proper grounding is essential to protect the touch sensor from electromagnetic interference (EMI) and ensure stable performance. How to Ground the Touch Controller To ground the system: Connect the ground ...

    • Integration of the Touch Controller

      How to Proper integrate the Touch Controller? To open the Touch Controller protective air-bag, carefully pierce the bag using a blade to release the air. This allows the controller to be removed safely and with minimal stress on components (see ...

    • Testing Before Lamination

      How do I test Ultra & Fit touch sensors before lamination? Why testing is important Before laminating the touch sensor, it's crucial to test it for: Shipping-related damage (rare but possible) Compatibility or interference with the glass or surface ...

    • Tune

      Fine-Tuning Skin Mesh The Displax Skin Mesh does not require manual fine-tuning thanks to its built-in Auto-Tune algorithm. This intelligent system continuously adjusts the touch controller settings, automatically calibrating the frame of reference ...