Related Articles
Advanced Calibration – Drag mode
Overview DRAG MODE Calibration is for sensors with custom shapes and sizes, or for when the desired active area is smaller than the full-size sensor. The DISPLAX Connect interface will be displayed on the entire screen, you must define the desired ...
How to activate DISPLAX Cast?
In the example below, you will see the Windows operating system command line. Open a console and change the current directory to Displax Service default location. Default locations Windows C:\Program Files\DISPLAX\Service\ macOS ...
Standard Calibration
Once you have good touch detection, start the Geometric Calibration and ensure you are as accurate as possible during this process. Click CALIBRATE if the Touch Sensor is only associated with one LCD. If the Touch Sensor is placed over more than one ...
Advanced Calibration – Multi Point
You may need to use more than 4 calibration points to calibrate the points inside of the Touch Sensor active area when: A single sensor is used on top of a smaller LCD/screen, or A single sensor is used on top of multiple LCD/screens To overcome the ...
Displax Painter
This feature provides more data than other testing mechanisms and is conveniently integrated into the DISPLAX Connect software. Depending on the PC specifications and the Skin product that you have, there are some features that may not be present, ...