Drying Period

Drying Period

Lamination

Drying Period


Leave the laminated touch sensor and glass to dry for 24 hours in a suitable, clean area, placing it flat, touch sensor side facing up.

Do not touch the touch sensor while it is drying.

Ideally, the drying area should have air conditioning to control and monitor the air, heat, and humidity levels:

a) The temperature of the air should be between 20 and 25 ºC;

b) The humidity level should be between 30% and 45%;

c) The drying time should be 24 hours.

The drying area should have a structure to place the glass with the laminated touch sensor, resting on a foam cover or coating (Fig. 29)

Foil facing upFig.29

    • Related Articles

    • Post-Drying Cleaning Process

      Lamination Cleaning process after drying Clean both sides using a soft, lint-free cloth dampened with water. Visually inspect the touch sensor to check there are no fingerprints, dirt, or other contaminants. For future cleaning and maintenance, ...