How can I setup multiple touch screens in Windows 10/11?

How can I setup multiple touch screens in Windows 10/11?

Ensure an external keyboard is connected to the PC.

Check Windows is set to Extended Desktop for the additional monitor (press Windows Key + P to check or correct).

This should cover all multi-monitor scenarios — each additional monitor being another screen that needs to be touched or skipped with the Enter key:

1. Click the Start Menu and start typing Control Panel

2. Once visible, click on Control Panel


3. Within the Control Panel, select Hardware and Sound


4. Within Hardware and Sound, select Tablet PC Settings


5. Click on Setup



6. Touch the touchscreen displaying the prompt, “Touch this screen to identify it as the touchscreen” (If it is not a touchscreen, press Enter)


7. Press Enter when prompted

8. Touch the next touchscreen when prompted “Touch this screen to identify it as the touchscreen” (press Enter if not a touchscreen)

9. The application should close when all connected monitors are accounted for. You can now test whether touch works on all applicable screens. If not, repeat the process starting from Step 5.

10. Restart the computer and verify that touch still works on the screens.


    • Related Articles

    • Touch Controller not detected in DISPLAX Connect

      No Touch Controller Detected There are many reasons a Touch Controller may not be detected by a computer. Ensure you double-check: All the motherboard drivers are properly installed (Windows) If the USB drivers of the computer are not installed, or ...

    • What is considered good touch performance?

      Having continuous touch without losing detection when dragging one finger, held 90º relative to the display, with minimal finger pressure. Test across the entire active area of the sensor, center and borders. Repeat the previous step, using 2 or more ...

    • Touch Accuracy Offset

      After obtaining an optimal touch performance and calibrating a touch sensor, if you find there is an offset to the accuracy of where the physical touch is in relation to where it shows on the display, please check 2 things: 1. Scaling applied in the ...

    • How to activate the touch in the operating system

      In order to get touch interaction in the operating system itself, you must ensure that the Touch Injection button is set to the ON position.

    • MacOS Monterey Workaround to Enable Touch

      With the release of macOS Monterey, touch no longer works by default with DISPLAX touch controllers. DISPLAX developed the following workaround. Software Needed DISPLAX Connect - used to configure the touch controller and to communicate via TUIO ...