Internal Videowall Processor

Internal Videowall Processor

Daisy-Chain Setup Using Internal Videowall Processor

DISPLAX TILE includes an internal videowall processor that allows multiple TILE units to be merged into a single display.

In this configuration:

  • TILE units are DisplayPort daisy-chained

  • TILE units are also RS232 daisy-chained

  • The layout is configured using Screen Control Software

  • The Operating System detects one screen per daisy-chained group

Daisy-Chaining Resolution Behaviour

All connected displays in a daisy-chain group share a maximum resolution of 4K (3840 × 2160), regardless of the number of monitors connected.
This means:
  1. The final merged resolution cannot exceed 3840 × 2160
  2. The resolution needs to be scaled to match the intended aspect ratio 

Example Setup (6 × 1 Video Wall)

Example layout:

  • 6 TILE units

  • 1 row × 6 columns

  • Portrait orientation


Each TILE resolution:
1080 × 1920  

Total resolution:
6480 × 1920  

Optimal resolution: (scaled)
3840 × 1138

Maximum Units

  • Up to 6 TILE units can be daisy-chained in a single sequence

Operating System Behavior

When using daisy-chain mode:
  1. The OS identifies all connected TILE units as a single display
  2. Configuration is simplified
  3. Individual monitor control at OS level is not available

Software Requirement

To merge screens and configure the video wall:

  • Screen Control Software must be used

  • This software manages:

    • Screen mapping

    • ID assignment

    • Layout configuration

    • Bezel correction

RS232 daisy-chain is mandatory for proper screen identification and merging.

    • Related Articles

    • Daisy-Chain Mode Example

      Creating a 2×4 Video Wall Using Two 2×2 Daisy-Chained Groups + GPU Mosaic When using DisplayPort daisy-chain mode, each group of TILE units is detected by the Operating System as one single display. This allows you to bypass GPU output limitations ...

    • DisplayPort Daisy-Chain Overview

      How Does DisplayPort Daisy-Chaining Work for Displax TILE? DisplayPort daisy-chaining is a configuration method for Displax TILE video walls that allows you to connect multiple TILE units in a sequence. By grouping these units together, the Operating ...

    • Video Wall Processor - Matrox

      How Do I Configure a DISPLAX TILE Video Wall with Matrox QuadHead2Go? The DISPLAX TILE is fully compatible with external video wall processors, including the Matrox QuadHead2Go. The QuadHead2Go is designed to split a single video source into four ...

    • RS232 Connection

      RS232 Daisy-Chain Connection Instructions DISPLAX TILE units can be daisy-chained via RS232 connection using RJ45 cables. This connection is required when configuring and merging TILE units using the internal videowall processor and VIDEOWALL CONTROL ...

    • Calibrate a Single Tile

      How Do I Calibrate a Single Displax Unit? If you are using a single Displax TILE unit, the calibration process is straightforward and closely mirrors the procedure used for a standard Displax Skin. You will use the Displax Connect software to align ...