IR Inputs

IR Inputs

The IR Jack Input on the DISPLAX TILE Pro allows connection to an external infrared (IR) receiver for remote control functionality, as the TILE Pro does not have a built-in IR receiver.

 Additionally, each TILE Pro unit includes an RJ45 IR extender that can be connected to the RS232-IN input, offering extended placement options for the external IR receiver.

This setup ensures convenient remote operation, even in complex installations like video walls or recessed configurations, providing flexibility and ease of control in various environments.
    • Related Articles

    • Package Contents

      Each DISPLAX Tile Pro unit box includes the following items: Hardware: DISPLAX Tile Pro touchscreen panel – The main display unit. Remote control – For easy management and configuration. Cables: DisplayPort cable – For high-resolution video input. ...
    • Ports

      Signal Port Description Signal Port Description 1 Power port 7 DP2 input port 2 ON/OFF switch button 8 USB 2 3 DP-OUT port 9 LAN port 4 HDMI1 input port 10 IR-IN port 5 HDMI2 input port 11 RS232-IN port 6 DP1 input port 12 RS232-OUT port 13 Touch ...
    • RS232 and LAN

      RS232 The RS232 port on the DISPLAX TILE Pro provides a control interface that allows users to manage display settings remotely, such as powering on/off, adjusting brightness, or changing inputs. For setups with multiple TILE Pro displays, RS232 ...
    • HDMI and DisplayPort Input

      HDMI Although Tiles Pro's native resolution is 1080p, the HDMI1/HDMI2 Input Ports on the DISPLAX TILE Pro support a maximum resolution of 3840 × 2160 at 60Hz, delivering sharp visuals for a wide range of applications. Use HDMI 2.0 or higher cables to ...
    • Tile Pro RS232 Commands

      RS232 Communication Protocol I. Introduction This method uses a hexadecimal command set, provides a standard RS232 communication interface, and has a loop-out interface for cascading use. 1. Related Settings: Baud Rate: 9600 bps Parity Bit: None Data ...