Light codes

Light codes

Light Codes – Active OR Tags

DISPLAX Active OR tags use visual light effects (LED codes) to indicate their system state or the result of specific actions. Understanding these light codes helps ensure correct setup, troubleshooting, and use of the tags.


Light Codes and Meanings

 Power States

  • Entering Active Mode
    Light blinks once in green

  • Entering Sleep Mode
    Light blinks once in magenta


Connection States

  • Unpaired Tag
    After entering Active Mode, if the tag is not paired (or connection with the Add-on is not completed), the tag will glow blue continuously

  • Paired Tag
    After entering Active Mode, if the tag is paired and the Add-on connection is completed:

    • Light will be off (tag is ready for user light actions)

    • Tag will briefly vibrate once to confirm pairing


Charging States

When the tag is placed on the wireless charger or connected to a USB-C cable, the tag glows according to its charge level:

  • Red – Battery low

  • Yellow – Charge halfway

  • Green – Charge nearing completion

    • Related Articles

    • Tag Effects

      Feedback Features: Light and Vibration A DISPLAX Active OR Tag provides two types of feedback: Light feedback through a full ring light around the tag Vibration feedback using the built-in vibration motor These features can be triggered in two ways: ...
    • Battery Indicator

      Battery Indicator for Active Tags DISPLAX Active OR Tags use their LED ring light to display battery levels and charging status. The exact percentage is also available in DISPLAX Connect. Battery Level Indicators Color Battery Level Description ? ...
    • Wireless Charger

      Wireless Charger – DPXActiveOR Section: Object Recognition > Active OR > Wireless Charger The DPXActiveOR wireless charger provides a convenient way to recharge active tags without wires or downtime. Tags can remain ready for use, charging ...
    • Overview

      Overview DISPLAX Active Object Recognition (DPXActiveOR) is a complete solution combining hardware and middleware to enable developers to create next-generation interactive experiences that go far beyond traditional OR systems. With Active OR, ...
    • Reset Button

      Reset Button Operation The Reset button on a DISPLAX Active OR Tag has multiple functions, depending on how long it is pressed. This button is accessible through a small hole at the bottom of the tag and should be pressed using a small pin, ...