Lamination Video Tutorial

Lamination Video Tutorial

Skin Zeeto – Lamination Video Tutorial

This tutorial demonstrates the complete step-by-step lamination process for DISPLAX Skin Zeeto touch sensors.
It covers how to:

  • Prepare the glass and workspace for a dust-free installation

  • Mix and apply the lamination solution (90% water / 10% Johnson’s Baby Shampoo)

  • Handle the sensor foil safely, including peeling the protective layer

  • Correctly align and place the foil on the glass

  • Use the squeegee technique to remove liquid and avoid bubbles

  • Perform the final inspection and drying phase

Following this method ensures optimal adhesion, durability, and touch performance of the Skin Zeeto sensor.



    • Related Articles

    • Skin Zeeto Lamination

      Diplax Skin Zeeto Lamination

    • Laminating with MIX and Squeegee

      Lamination Method Use this method to properly adhere the Displax touch sensor to the glass using the MIX solution and “squeegee 2.” Preparation Use “squeegee 2” only for lamination (do not reuse from cleaning) Confirm the touch sensor is already ...

    • Assembly Video Tutorial

      Mesh Overlay – Assembly Video Tutorial This video tutorial provides a step-by-step guide to assembling and installing the DISPLAX Skin Mesh Overlay Kit onto an LCD display. In this demonstration, you will learn: How to prepare the workspace for ...

    • Resources

      What tools and materials do I need to laminate a Displax touch sensor? This guide lists all the essential tools and resources needed to laminate a Displax touch sensor onto a glass substrate. ⚠️ Important: Always test the sensor before lamination. ...

    • Lamination

      Skin Zeeto Lamination Process The correct lamination to glass of the Skin Zeeto sensors ensures durability, accuracy, and long-term performance. This article explains the recommended step-by-step lamination process. A full video tutorial can also be ...