Tune

Tune

Fine-Tuning

Skin Mesh

The Displax Skin Mesh does not require manual fine-tuning thanks to its built-in Auto-Tune algorithm. This intelligent system continuously adjusts the touch controller settings, automatically calibrating the frame of reference based on changing environmental or installation conditions. As a result, optimal touch performance is consistently maintained—no manual intervention needed.

Using the Tune Setting in Displax Connect

Within the Displax Connect software, you’ll find a toggle switch labeled “Tune.”
We strongly recommend keeping this enabled to allow the Auto-Tune algorithm to function and ensure maximum touch responsiveness.

Note: When Tune is enabled, the Threshold slider becomes disabled, since sensitivity adjustments are automatically handled by the system.

    • Related Articles

    • Tune

      Fine-Tuning DISPLAX Overlay The Displax Overlay uses the Skin Mesh technology and does not require manual fine-tuning thanks to its built-in Auto-Tune algorithm. This intelligent system continuously adjusts the touch controller settings, ...

    • Skin Mesh Calibration

      Calibration The DISPLAX Skin Mesh is designed to provide a Plug & Play experience using HID (Human Interface Device) technology. This means no drivers are required. However, in rare cases where there is a visible offset in touch accuracy, manual ...

    • Grounding Touch Controller

      Why is Grounding the Controller Important? Proper grounding is essential to protect the touch sensor from electromagnetic interference (EMI) and ensure stable performance. How to Ground the Touch Controller To ground the system: Connect the ground ...

    • Controller Configuration

      Controllers and Config Skin Mesh Depending on the sensor size, Displax Skin Mesh requires a corresponding Touch Controller model, each preconfigured to work with a specific range of sensor dimensions. Available Touch Controllers: CH130 — For sensors ...

    • Integration of the Touch Controller

      How to Proper integrate the Touch Controller? To open the Touch Controller protective air-bag, carefully pierce the bag using a blade to release the air. This allows the controller to be removed safely and with minimal stress on components (see ...