A video has been created to support the integration process:
Note: Your product may have a different design from the one presented in this user guide and instruction video.
This article assumes you already have the Touch Sensor laminated on glass. For more information on how to laminate, please refer to the Lamination section.
Lamination Overview The Touch Sensor must be laminated onto a non-conductive substrate, such as glass, acrylic, corian, wood, mirror, or other non-conductive material. The touch sensors are available in 2 versions, permanent and removable: The ...
Overview For a good connection between the touch sensor cables (FPC/Flex) and the touch controller (PCB/Touch Controller Board), ensure they are well and correctly seated inside the FPC connector ports before closing the Connector locks. Each FPC ...