Restart

Restarting the Touch Controller in Displax Connect

The Restart button restarts the Touch Controller.

When to Use:
Always restart the Touch Controller after changing configuration settings to ensure your adjustments take effect properly.

• Related Articles

• Restart

  Restart the Touch Controller The Restart Touch Controller option in DISPLAX Connect allows you to safely reboot the controller without disconnecting cables or powering off the system. This is useful when: You’ve made configuration changes (Gain, ...

• Auto-Save Settings

  Auto-Save Settings in DISPLAX Connect In the latest version of DISPLAX Connect, the Auto-Save feature is disabled by default. When Auto-Save is off, any change you make to the settings will trigger a Save Changes button, allowing you to confirm ...

• Update Touch Controller Firmware

  Firmware Update When a new firmware version becomes available for your DISPLAX Touch Controller, you’ll see an Update button next to the current firmware version inside DISPLAX Connect. Updating the firmware ensures your controller is running with ...

• Upgrade Touch Controller Firmware

  Firmware Upgrade When a new firmware version becomes available for your DISPLAX Touch Controller, you’ll see an Update button next to the current firmware version inside DISPLAX Connect. Updating the firmware ensures your controller is running with ...

• Frame Classification (Skin Zeeto Only)

  What is Frame Classification? Frame Classification is a Skin Zeeto–specific feature in DISPLAX Connect that visually displays where water is being detected on the touch sensor. When enabled, the frame representation inside DISPLAX Connect highlights ...