Screens

When you have more than one monitor connected, you can choose on which one the calibration screen should appear.

Attention: After calibration, each operating system has its own way to operate the touch sensor on a specific screen. This option in DISPLAX Connect allows you to get the calibration points to appear on the desired monitor. It does not tell the Operating System that the Touch Sensor should be working on that specific screen.

• Related Articles

• Advanced Calibration – Multi Point

  You may need to use more than 4 calibration points to calibrate the points inside of the Touch Sensor active area when: A single sensor is used on top of a smaller LCD/screen, or A single sensor is used on top of multiple LCD/screens To overcome the ...

• Gain & Threshold

  The Gain setting adjusts the signal strength injected by the Touch Controller into the Touch Sensor. Values range from 0 to 7. Thicker glass screens and larger Touch Sensors require a stronger signal (higher Gain value). The Threshold setting adjusts ...