Touch Optimization

Optimization is a parameter that allows choosing the balance between speed and smoothness of Touch. Factory settings are halfway between Touch speed and Touch smoothness for Skin Ultra and Skin Fit; for Skin Dualtouch the factory settings slightly favor touch speed. You can change the default value to optimize the Touch experience in accordance with the desired usage.

If you want more Touch smoothness, you can obtain it by increasing the optimization level. This is useful for drawing or writing.
Conversely, if you want more Touch speed, you can gain it by decreasing the optimization level. Useful for non-precision activities, like touching buttons and manipulating images.
Always try to establish an adequate compromise between precision and speed according to the application content and user experience you wish to provide.

• Related Articles

• Touch Representation

  Enable or disable touch representation:

• Touch Controller Information

  In the upper-left corner of DISPLAX Connect, you can find useful information, such as: Product Name Touch Controller Firmware Version Touch Controller Serial Number Label, which can be changed to a user-friendly word

• Touch injection warning on close

  When closing Displax Connect with the Touch button set to OFF, you will see a prompt confirming whether you wish to enable the Touch injection in the operating system, or leave it off:

• Enable / Disable areas of the touch sensor

  You may need to disable specific Rows and/or Columns. For that, you can click on the Sensor Tools button and use the numbers around the edge of the Sensor Tools view to disable a specific row/column. In the following example we disable rows 0, 1, and ...

• Upgrade Touch Controller Firmware

  When new Firmware versions become available, you will notice an Update button next to the Firmware version: ​