Uptime

Uptime

Overview

The Uptime command allows you to check how long a DISPLAX Touch Controller has been powered on and running continuously.

This information is useful for:

  • Diagnostics and troubleshooting

  • Verifying recent restarts or power cycles

  • Monitoring system stability

How to Check Touch Controller Uptime

Run the following command:

displaxservice -a 127.0.0.1 --duptime

Parameter Explanation

  • -a 127.0.0.1 → Targets the local Touch Controller

  • --duptime → Displays the total powered-on runtime

    • Related Articles

    • Restart the Touch Controller

      Overview The Restart Touch Controller command allows you to remotely reboot the Touch Controller using DISPLAX Service, without restarting the host computer. Restarting is recommended after: Changing low-level device parameters Applying and saving ...

    • What is DISPLAX Service?

      DISPLAX Service Overview DISPLAX Service is a background process (agent/daemon) installed alongside DISPLAX Connect that enables low-level communication with your DISPLAX Touch Controllers. It acts as a command-line interface, allowing advanced ...

    • Touch operation mode

      Overview By default, DISPLAX Touch Controllers automatically select the correct touch operation mode for the operating system in use. In most cases, no manual configuration is required. However, if your application or environment requires a specific ...

    • Factory Reset

      Overview The Factory Reset feature allows you to restore a DISPLAX Touch Controller to its original factory default settings using DISPLAX Service. This action resets all configuration parameters and calibration data stored on the Touch Controller, ...

    • Firmware Version

      Overview The Firmware Version command displays the firmware currently installed on the DISPLAX Touch Controller. This information is important when: Checking compatibility with Displax Connect Troubleshooting unexpected behavior Confirming firmware ...