Why can’t I see the Configuration Wizard button?

• Related Articles

• MacOS Monterey Workaround to Enable Touch

  With the release of macOS Monterey, touch no longer works by default with DISPLAX touch controllers. DISPLAX developed the following workaround. Software Needed DISPLAX Connect - used to configure the touch controller and to communicate via TUIO ...

• How to activate the touch in the operating system

  In order to get touch interaction in the operating system itself, you must ensure that the Touch Injection button is set to the ON position.

• macOS Mouse Emulation Mode

  To emulate the mouse through touch follow these steps. In macOS Mojave and later, upon installing Displax Connect - after allowing for applications from known developers (not in the App Store) - you will see the following pop-up dialog: "Starting ...

• Rotate or Swap Touch Calibration - Linux

  If you are using a Linux operating system, or any OS that doesn’t support DISPLAX Connect, you may need to rotate or swap the X and Y coordinates (for example: Raspbian, Ubuntu Mate or Raspberry PI 3). To do this just follow the steps below. ...

• USB Extenders and Hubs

  USB Extenders There are many types of USB Extenders on the market. Depending on the cable length, be sure to choose the correct type. The most common are: Passive cables which don’t have a power adapter or repeater to boost the signal Repeater cables ...