Integration
Touch Controller Grounding Points
All DISPLAX touch controllers, apart from the grounding connector, feature additional grounding points. These points are situated within the holes positioned at each corner. However, in the Skin Mesh controllers, only the two holes on the connector's ...
Grounding Touch Controller
To protect the touch sensor from electromagnetic interference, it is mandatory to connect the ground wire from the touch controller to a metal part of the chassis of the LCD behind the touch sensor. The ground cable connector is right next to the USB ...
Connecting the Touch Controller to the Sensor
Overview For a good connection between the touch sensor cables (FPC/Flex) and the touch controller (PCB/Touch Controller Board), ensure they are well and correctly seated inside the FPC connector ports before closing the Connector locks. Each FPC ...
Integration of the Touch Controller
Integration Integration of the Touch Controller To open the Touch Controller protective air-bag, carefully pierce the bag using a blade to release the air, making it easier to remove it safely (see Packaging Section, Unpack). Determine the position ...
Mounting a laminated Touch Sensor on a Display
Integration Mounting a glass with laminated Touch Sensor on a Display Clean the LCD and the glass on which the Touch Sensor has been laminated. Use a soft, damp lint-free cloth with 10% dishwasher detergent to 90% water solution to clean the glass. ...
Touch Controller Safety Instructions
Safety Instructions for Touch Controller (PCB) The product contains electronics, which are electrically sensitive. Please take the necessary precautions when using such devices. DO NOT TOUCH THE UPPER OR LOWER FACES OF THE TOUCH CONTROLLER. FINGERS ...
Video Tutorial
Integration Overview A video has been created to support the integration process: Note: Your product may have a different design from the one presented in this user guide and instruction video. This article assumes you already have the Touch Sensor ...