Start a conversation

Displax Connect

Get help with the Displax Connect software and start using the Displax Touch sensors

  • Upgrade the Touch Controller Firmware

    There are two options to change the Firmware of the Displax Touch Controller: 1: Using the new Firmware version notification 2: Upload the Firmware from a file     New Firmware version notification  N...

  • What is the Configuration Wizard?

    The Configuration Wizard is a tool that will assist you setting the Gain, Threshold, Shield and Calibration.   The configuration of thesesettings is required to have touchrecognition. This feature is ...

  • Options available on the Calibration tab

    A - You can select where you want to perform the geometric calibration. Usually you have one display connected to the computer but you can have two or more displays. B - If you have a simple setup, su...

  • Install or Uninstall Displax Connect

    How to install of uninstall Displax Connect on Windows, Ubuntu or macOS.  To install please go to Downloads area on the support webpage and choose the correct file accordingly your Operating System (W...

  • How to work with the Palm and ARM detection

    This feature allows the rejection of areas with dimensions larger than a finger, such as a hand or an arm.  The rejection area can be configured and is conditioned by the Touch Sensor size. For the sa...

  • How to set the values of the Gain and Threshold

    The Gain adjusts the signal strength injected by the Touch Controller on the Touch Sensor. Gain values range between 0 and 7. Thicker glasses and bigger Touch Sensors will require a stronger signal (h...

  • How to check the Displax Connect version?

    The Displax Connect version is located on the area indicated bellow....

  • Load and/or Save Settings

    The Displax Connect allows you to save all the settings (including the calibration data) to a file and upload all the settings from a file to the Touch Controller.  Load: allows loading previously sav...

  • How to get the Touch Controller Serial Number?

    The serial number of the Touch Controller is located on the area indicated below:  ...

  • Sensor Tools

    Checks the Touch Sensor electrical conditions on rows and columns and permits to: Enable and disable rows and columns Draw block areas Checking the electrical conditions of the rows and columns (using...