Lamination Overview

Lamination Overview

Lamination Overview for DISPLAX Skin Ultra

Lamination is the process of applying a DISPLAX Skin touch sensor onto a non-conductive surface such as glass. It ensures durability, accuracy, and stable touch performance.

Key Steps

  1. Clean the glass – Use ethyl alcohol and a lint-free cloth to remove dust, grease, or contaminants.

  2. Prepare the solution (MIX) – 90% distilled water + 10% Johnson’s Baby Shampoo.

  3. Apply the sensor – Place the touch sensor carefully on the prepared glass.

  4. Use a squeegee – Remove excess solution and ensure there are no bubbles or particles.

  5. Drying period – Leave the laminated sensor flat for 24 hours in a clean, temperature-controlled environment.

⚠️ Handle the sensor gently to avoid creasing, and always unpack and laminate in a clean, dust-free workspace.


For more detailed information, please visit the Lamination Getting Started Guide section here.

Tutorial Video


    • Related Articles

    • Lamination Overview

      Lamination Overview for DISPLAX Skin Fit Lamination is the process of applying a DISPLAX Skin touch sensor onto a non-conductive surface such as glass. It ensures durability, accuracy, and stable touch performance. Key Steps Clean the glass – Use ...

    • General Integration Tips and Installation Best Practices

      DISPLAX Skin Ultra Proper integration of DISPLAX Skin Ultra is critical to ensure reliable touch performance and long-term stability. Because Skin Ultra is designed for custom installations, careful attention must be given to mechanical mounting, ...

    • Connecting the Skin Fit Sensor to the Controller

      Overview A proper connection between the touch sensor's FPC cables (flex) and the touch controller (PCB) is essential to ensure optimal touch performance. Each FPC cable has a specific connector port on the PCB. Ensure cables are fully seated and ...

    • Skin ROUND

      The DISPLAX SKIN ROUND is circular in shape for projection or a round LCD. The Touch sensor is the same as SKIN ULTRA, which allows for Object Recognition. Click on the below links for details on: Lamination Fine-tuning Calibration

    • Connecting the Skin Ultra Sensor to the Controller

      Overview A proper connection between the touch sensor's FPC cables (flex) and the touch controller (PCB) is essential to ensure optimal touch performance. Each FPC cable has a specific connector port on the PCB. Ensure cables are fully seated and ...