Touch Controller
Restart the Touch Controller
Overview The Restart Touch Controller command allows you to remotely reboot the Touch Controller using DISPLAX Service, without restarting the host computer. Restarting is recommended after: Changing low-level device parameters Applying and saving ...
Factory Reset
Overview The Factory Reset feature allows you to restore a DISPLAX Touch Controller to its original factory default settings using DISPLAX Service. This action resets all configuration parameters and calibration data stored on the Touch Controller, ...
Firmware Version
Overview The Firmware Version command displays the firmware currently installed on the DISPLAX Touch Controller. This information is important when: Checking compatibility with Displax Connect Troubleshooting unexpected behavior Confirming firmware ...
Serial Number
Overview The Serial Number command allows you to retrieve the unique serial number of a DISPLAX Touch Controller. The serial number is required for: Specifying a device to run commands on when multiple devices are connected Technical support requests ...
Delay After Sleep
Overview The Delay After Sleep parameter defines how long the Touch Controller waits before becoming active after the system or display wakes up from a sleep or standby state: --dsfrd The delay is specified in milliseconds (ms). This feature is ...
Uptime
Overview The Uptime command allows you to check how long a DISPLAX Touch Controller has been powered on and running continuously. This information is useful for: Diagnostics and troubleshooting Verifying recent restarts or power cycles Monitoring ...