Active OR
Effects editor
Within Displax Connect it is possible to customize the the color and vibration effects. To access the Effects editor follow the steps show on the link below:
Battery indicator
The Active Tags battery levels are represented by 4 different colors of their LED ring lights as well as in DISPLAX Connect: Green - Fully charged Yellow - Around 50% Amber - Around 33 % Red - Less than 15% The exact percentage of the battery level ...
Tag effects
A DISPLAX Active OR tag offers two features of feedback: light and vibration. There are two ways these features can be used: programmaticaly (see DisplaxSDK), on Displax Connect (mainly for testing purposes, see here), The sleep mode timeout is reset ...
Requirements
Hardware Displax Skin Ultra touch sensor, with diagonal between 43" and 65", laminated on glass with maximum 4mm thickness (mandatory) Displax Skin Ultra controller with DPXActiveOR support firmware DPXActiveOR add-on module, connected to Ultra ...
Reset button operation
The Reset button has various functions. The different functions are triggered depending on the amount of time the button is pressed for. The button, accessible through a small hole at the bottom of the tag, should be pressed using a small pin, ...
DISPLAX SDK
Displax SDK is a bundle of small libraries that provides access to Displax Service. The SDK bundle supports the following frameworks: C++ (for Qt framework) C# (for Unity framework) DisplaxSDK library, when embedded in an application, abstracts the ...
Pairing
The Displax Active Tags work through bluetooth connection. In order to pair them with your Skin Ultra follow, the steps shown in the video below. For the Tags to be recognized, it is required to exit them from Transportation mode. Find more ...
Change ID and Name
You can change the the ID and Name of a tag from within Displax Connect. This is useful if, for example, you want to change the the tag with ID 1 to 2, since the ID is automatically attributed by pairing order. Each tag also has a name attributed by ...
Light codes
On specific tasks and contexts, the tag will show light effects. These light effects should be understood as light codes, as they identify a specific system state or system task result. The light codes, and their meanings are listed below: Entering ...
Add-on
The Add-on is a Bluetooth LE module to bridge the communication between tags and the Skin Ultra controller. The Skin Ultra controller requires an assembled interface port connector and a DPXActiveOR enabled firmware. The add-on connects to the ...
Wireless Charger
DPXActiveOR wireless charger allows the active tags to be charged when are idle (outside the sensor), without the need for wired connections (no hanging wires and/or charging periods where the tag is not available for use). By having a wireless ...
Overview
DISPLAX Active Object Recognition (DPXActiveOR) solution is a combo of hardware and middleware, which enables interactive solutions developers to integrate and deliver powerful Object Recognition (OR) interactive experiences, going beyond traditional ...